The Norland XR-36 is a bone densitometer that uses the pencil beam technology. It has been equipped with an 8” DXA patient table. This bone densitometer has been designed for the standard sites of whole body (BMC), AP spine, lateral spine, hip and the forearm. It provides you with scan times of 5 minutes for whole body, 2 minutes for spine, 3 minutes for hip and 3 minutes for forearm.

The Norland XR-36 is known for its exclusive dynamic filtration. This machine has the ability to compensate the widest range of patient thickness automatically. It also is designed with a 77 step calibration process that allows you to scan a wide range of patients without using special calibration or data correction. With this bone densitometer, filters are changed within a single pixel acquisition with no data loss.

Norland XR-36 Densitometer Machine Features:

• 8 foot patient table
• Pencil beam technology
• Exclusive Dynamic Filtration
• Compensates for a wide range in tissue thickness

For additional information on the Norland XR-46Densitometer Machine, please contact Bone Density Machines. We can provide high quality bone densitometry equipment at the right price for your clinic.

The Norland XR-46 bone densitometer machine is a DXA scanner that uses the pencil beam technology. It accommodates full body or regional scans. This machine has been designed for the clinical sites of the (BMD) whole body, AP spine, lateral spine, hip and forearm. It has been designed with an exclusive 77 step calibration process to allow a wide scanning range of patients without any special calibration or data correction.

The Norland XR-46 is equipped with an 8” DXA table and a large active scan area to accommodate more patient sizes. It provides fast scan times of < 1.5 minutes for AP spine, < 2.0 minutes for hip, < 3.0 minutes for forearm, < 4.0 minutes for lateral spine and 5 minutes for Whole Body. 

Norland XR-46 Densitometer Machine Features:

• 8 foot patient table
• Fast scan times
• Equipped with an exclusive 77-step calibration process Large active scan area
• Accommodates a wide range of patient sizes

The Apollo is a bone densitometer by Norland that is used for the heel. This densitometer assesses the metabolically active and weight bearing trabecular bone that is in the calcaneus. This machine uses the DXA technology which allows for no water bath. This DXA technology is the most widely accepted bone density scanning technology. This machine offers low scan times and the lowest ionizing radiation exposure of the competing bone densitometer machines.

The Norland Apollo is small, compact and best of all, portable. When you buy the Norland Apollo, you are going to offer your clinic more flexibility for out of the clinic testing. The machine is very is easy to use which allows for minimal training. This bone densitometer operates from a hand held control console and has a printer that will give you quality reporting with the Norland pioneered fracture risk assessment feature.

Norland Apollo Densitometer Machine Features:

• Portable
• Comfortable for patient
• Low scan times
• Low ionizing radiation exposure
• Desktop printer

For additional information on the Norland Apollo Densitometer Machine, please contact Bone Density Machines. We can provide high quality bone densitometry equipment at the right price for your clinic.

The Excell by Norland is a 6 foot bone densitometer machine that uses the pencil beam technology. The standard clinical sites for this machine are the AP spine and the proximal femur. It is equipped with an exclusive 77 step calibration process that allows you to scan a wide range of patients without any special calibration or data correction. It also has an exclusive dynamic filtration system that allows for a wide range of patient thickness to ensure that every data point of the patient receives the proper exposure.

The Norland Excell offers your clinic with faster scan times. You have the ability to scan the AP spine in under 1.5 minutes and the hip in under 2 minutes. This bone densitometer has the risk assessment featured that will provide you with simple color reporting for both the physician and the patient.

Norland Excell Densitometer Machine Features:

• 6” patient table that holds up to 400 pounds
• Pencil beam DXA (dual energy x-ray absorptiometer)
• Small footprint that is ideal for any clinic
• Presents standard BMD using NHANES III data

For additional information on the Norland Excell Densitometer Machine, please contact Bone Density Machines. We can provide high quality bone densitometry equipment at the right price for your clinic.

The Eclipse by Norland is a 6 foot pencil beam bone densitometer. The standard clinical sites that are used with this densitometer are the AP spine and hip. When you buy the Norland Eclipse, you will receive fast scan times. You will be able to perform an AP scan in under 1.5 minutes and a hip scan in under 2 minutes. The Eclipse has some of the most advanced patient management capabilities available allowing highly reproducible exams.

The Norland Eclipse has an exclusive 77 step calibration process that allows a wide scanning range of subjects without any special calibration or correction of the data. This machine has also been designed with exclusive dynamic filtration that will automatically compensate for the widest ranges in your patients thickness that ensures every data point receives the proper exposure.

Norland XR-800 Densitometer Machine Features:

• Equipped with a 6 foot DXA table
• Uses the pencil beam technology
• Small footprint which is ideal for any clinic or private office
• Uses Dynamic filtration (automatic exposure control)

For additional information on the Norland Eclipse Densitometer Machine, please contact Bone Density Machines. We can provide high quality bone densitometry equipment at the right price for your clinic.

The McCue C.U.B.A. is a precision ultrasound machine that performs calculations of bone density at the heel site. When you perform exams, the procedure will be painless for most of your patients. The exam involves canning only the heel bone. It has a 30 second settling system that prevents patient edema from affecting the results. The McCue C.U.B.A. also does not produce ionizing radiation. When you purchase the McCue C.U.B.A. you are going to receive a machine that will give you accurate and reliable results at a very low investment.

The Norland McCue C.U.B.A. is portable. This machine only weighs 22 pounds which makes it easy to transport. This machine comes with easy to use software that features a Windows® format that allows the data to export to other programs and access Windows printer drivers.

Norland McCue C.U.B.A Densitometer Machine Features:

• Low investment cost
• No water bath required
• Quick setup
• Portable and easy to transport

For additional information on the Norland McCue C.U.B.A Densitometer Machine, please contact Bone Density Machines. We can provide high quality bone densitometry equipment at the right price for your clinic.

The XR-800 bone densitometer machine by Norland is a central DXA system that is capable of scanning the standard clinical sites including the whole body, AP spine, hip, lateral and forearm. When you buy the Norland XR-800, you will have access to Norland’s Illuminatus software package which features the high speed of pencil-beam X-ray technology. The software tools have also been designed for HIPAA compliance. You will also have access to “Folder Mail” and “Image Mail” that will allow you to send out reports to local and remote locations.

The Norland XR-800 is equipped with an 8-foot patient table that has a scan area of 76” L X 25.5” W. This table can accommodate patients up to 400 pounds and is fitted with a washable pad to provide low maintenance and optimal hygiene. It also includes a 77-point calibration system that use a matrix that has been constructed from 7 bone density samples that have been crossed with 11 soft tissue levels.
Norland XR-800 Densitometer Machine Features:

• Uses the high speed pencil beam technology
• Equipped with an 8 foot DXA table to accommodate all patient heights
• Includes advanced database tools
• Access to support tools to provide both printed and electronic reports
• Includes the Intelligent Scanning Technology

For additional information on the Norland XR-800 Densitometer Machine, please contact Bone Density Machines. We can provide high quality bone densitometry equipment at the right price for your clinic.

The XR-600 bone densitometer machine by Norland is a pencil beam DXA scanner that has been designed for the AP and hip sites that runs on the Norland’s Illuminatrus software application. This machine has tools for HIPAA compliance and automatic analysis of change over both the short and long term periods of the study of a patient. When you buy the XR-600, you will be able to monitor any significant change on all assessed regions of interest. This bone densitometer also includes an advanced database of tools that allow allow Illuminatus to maintain a large number of operator built databases for archived scans.
The Norland XR-600 machine includes a 77-point calibration system. This calibration system uses a matrix that is constructed from 7 bone density samples crossed with 11 soft tissue levels. It is equipped with a 6-foot patient table with an active scan are of 50” L X 25.5” W that has a 400 pound weight limit. 

Norland XR-600 Densitometer Machine Features:

• Equipped with a washable tabletop pad
• Includes a hip sling with a foot separator
• Has “Folder and Image Mail” which will allow you to send multiple copies to local or remote locations
• Includes Intelligent Scanning Technology
• Includes Scout Scanning Technology

For additional information on the Norland XR-600 Densitometer Machine, please contact Bone Density Machines. We can provide high quality bone densitometry equipment at the right price for your clinic.